Coverage: This warranty pertains to all kitchen fabrication products (“Products”) sold by Brandon to the Customer. It encompasses defects in materials and craftsmanship under normal usage and service conditions. The warranty is valid for a period of 12 months from the date of installation at the Customer’s site or 18
QSR brands adopt different procurement strategies, impacting the role of distributors. Some buy directly from manufacturers, while others rely on full-service distributors or self-consolidation for international expansion. Understanding these models helps distributors align their services, offering flexibility, logistics, and strategic partnerships to support global QSR growth.
The hi-limit in a fryer is an essential safety feature that shuts down the fryer when the thermostat fails to regulate the temperature. It prevents overheating by cutting off gas or electrical supply when temperatures exceed safe levels, protecting against fire hazards. Addressing frequent tripping indicates possible thermostat failure or electrical issues, requiring immediate attention.
To prevent hi-limit tripping in gas, electric, and computer-controlled fryers when using solid fat, wrap the fat around fire tubes or heating elements, minimizing air gaps. Start at the lowest thermostat setting, and gradually increase the heat after the fat melts. Even with automated fryers, this precaution ensures efficient melting and prevents overheating.
For a warranty service call on a gas cooking equipment, technicians need essential tools such as a multimeter, gas pressure gauge, socket set, and thermometer. Proper safety equipment, sealants, and cleaning materials ensure efficient diagnostics and repairs.
Isolating power and gas is the first, most important step before cleaning burners, opening a gas train, or touching any ignition components. Done right, it prevents unexpected ignition, fuel release, shock, and equipment damage. This post gives technicians a precise, repeatable procedure you can embed in your SOPs. What “Isolate Power/Gas” Means Why both? Many
Set by dynamic, confirm with static: use dynamic pressure under load for manifold and inlet specs, and use static only to ensure you’re below the max. A quick field procedure and cues help you commission gas equipment right the first time.
Why reducing exhaust can help (in some cases) Think of the kitchen as an air-balance equation: Exhaust (out) – Make-Up Air (in) = Pressure deficit (ΔP). In short: you’re not “adding oxygen” by reducing exhaust — you’re removing excessive suction so the oxygen already being supplied can actually reach the burners without being whisked away