Pasta-Cooker-MEG90P8

Features

● Vat made of 316 of stronger corrosion resistance than 304
● Cast iron burner
● Imported gas value with high and low flame
● Tank capacity: 29 –33 liter per tank
● Water inlet value in the front
● Controlled water flow into tank to prevent splash and strong water current
● Dual use: for both pasta and Asian noodle
● Water overflow
● High grade stainless steel: SUS 304 for food contact safety
● Heavy gauge design: 1.5 mm table top and tank; other structural area from 1.2mm to 2.0 mm
● 6” adjustable leg

Accessories : Pasta basket or noodle basket

Gas inlet pressure:
● Natural Gas : 2.0 kPa
● LP Gas : 2.8 kPa
● Town Gas : 1.5 kPa
Gas inlet /Drain outlet: DN20
Water inlet : DN15 inner thread

Description

Model Description Dimensions (mm) Gas power
MEG90P4 Single vat pasta cooker 400 x 900 x (850+150) 31000 btu/h (9 kW) x 2
MEG90P8 Two battery pasta cooker 800 x 900 x (850+150) 31000 btu/h (9 kW) x 4

From the blog

Our latest posts

  • Isolate Power & Gas Before Servicing Commercial Gas Equipment

    Isolating power and gas is the first, most important step before cleaning burners, opening a gas train, or touching any ignition components. Done right, it prevents unexpected ignition, fuel release, shock, and equipment damage. This post gives technicians a precise, repeatable procedure you can embed in your SOPs. What “Isolate Power/Gas” Means Why both? Many

    Read more

  • Gas Pressure 101: Static vs. Dynamic — Which Reading Actually Matters?

    Set by dynamic, confirm with static: use dynamic pressure under load for manifold and inlet specs, and use static only to ensure you’re below the max. A quick field procedure and cues help you commission gas equipment right the first time.

    Read more

  • Reducing exhaust to improve yellow or lazy flame

    Why reducing exhaust can help (in some cases) Think of the kitchen as an air-balance equation: Exhaust (out) – Make-Up Air (in) = Pressure deficit (ΔP). In short: you’re not “adding oxygen” by reducing exhaust — you’re removing excessive suction so the oxygen already being supplied can actually reach the burners without being whisked away

    Read more