Gas-range-MAGH80R36-6

Features

Burners :
● Open burner and oven burner made of cast iron
● Flame supervisory device for safety
● Grates/Trivets made heavy duty cast iron, flame shaping center for efficient heat transfer

Oven:
● Heavy Duty door hinge withstands heavy load and repetitive open and close
● Piezo ignition
● Enameled door liner and oven cavity
● Nickel plated rack and shelves, can put 18/26 sheet pan
● High grade stainless steel: SUS 304 for food contact safety
● Heavy gauge design: 2.0 mm table top; other structural area from 1.2mm to 2.0 mm
● 6” adjustable leg

Gas inlet pressure:
● Natural Gas : 2.0 kPa
● LP Gas : 2.8 kPa
● Town Gas : 1.5 kPa
Gas inlet : DN20

Description

Model Description Dimensions (mm) Gas power
MAGH80R24-4 4 Open burner + oven 618 x 800 x (850 +150) Open burner:31,000 btu/h (9 kW) x 4;
Oven: 24,500 btu/h (7.1 kW)
MAGH80R36-6 Open Burner + oven 918 x 800 x (850 + 150) Open burner: 31,000 btu/h (9 kW) x 6;
Oven: 24,500 btu/h (7.1 kw)
MAGH80R24-2-12G 2 Open burner
+12″griddle + oven
618 x 800 x (850 + 150) Open burner: 31,000 btu/h (9 kW) x 2;
Griddle; 17,100 btu/h (5 kW) ;
Oven: 24,500 btu/h (7.1 kW)
From the blog

Our latest posts

  • Isolate Power & Gas Before Servicing Commercial Gas Equipment

    Isolating power and gas is the first, most important step before cleaning burners, opening a gas train, or touching any ignition components. Done right, it prevents unexpected ignition, fuel release, shock, and equipment damage. This post gives technicians a precise, repeatable procedure you can embed in your SOPs. What “Isolate Power/Gas” Means Why both? Many

    Read more

  • Gas Pressure 101: Static vs. Dynamic — Which Reading Actually Matters?

    Set by dynamic, confirm with static: use dynamic pressure under load for manifold and inlet specs, and use static only to ensure you’re below the max. A quick field procedure and cues help you commission gas equipment right the first time.

    Read more

  • Reducing exhaust to improve yellow or lazy flame

    Why reducing exhaust can help (in some cases) Think of the kitchen as an air-balance equation: Exhaust (out) – Make-Up Air (in) = Pressure deficit (ΔP). In short: you’re not “adding oxygen” by reducing exhaust — you’re removing excessive suction so the oxygen already being supplied can actually reach the burners without being whisked away

    Read more