Wall Mounted Shelf

Wall mounted shelf frees up valuable floor space for
other kitchen activities. Its slim profile maximizes
space in a kitchen without compromising storage
capacity.

Superior strength
● Heavy gauge stainless steel adds strength and
durability, meeting rigorous load bearing test and
impact test.
● Safely holds kitchen equipment, utensils, and
supplies.
● Reinforced shelving for additional support and
stability.
knock down design
● Easy to install and disassemble
● Low cost of transportation and storage
Flexible
● Adjustable shelf height to accommodate various
needs.
Hygiene and Cleanliness
● Smooth surfaces with no crevices to prevent
food particle accumulation.
● Detachable shelves for thorough cleaning and
sanitization.
Note: Wall mount shelf of non
non-adjustable height is
available upon request. It is of welded construction
and not of knock down design.

Shelf
● Made of AISI 304 (201 option is available).
● Flat or slatted. Reinforced flat shelf thickness:
standard 1.2 mm, other thickness also available.
● Slatted shelf: dia 25 mm.
● Brackets: 2 brackets for lengths up to 2000 mm,
and 3 thereafter. Bracket thickness 2.5 mm.

Description

Model below are of material 304. Please contact us if you need 201.

Item Type of shelf Width Depth Adjustable
GQ1030-1 flat 1000 300 No
GQ1230-1 flat 1200 300 No
GQ1530-1 flat 1500 300 No
GQ1830-1 flat 1800 300 No
GQ1035-1 flat 1000 350 No
GQ1235-1 flat 1200 350 No
GQ1535-1 flat 1500 350 No
GQ1835-1 flat 1800 350 No
GQ1030-2 flat 1000 300 Yes
GQ1230-2 flat 1200 300 Yes
GQ1530-2 flat 1500 300 Yes
GQ1830-2 flat 1800 300 Yes
GQ1035-2 flat 1000 350 Yes
GQ1235-2 flat 1200 350 Yes
GQ1535-2 flat 1500 350 Yes
GQ1835-2 flat 1800 350 Yes
GQJ1030-1 slatted 1000 300 No
GQJ1230-1 slatted 1200 300 No
GQJ1530-1 slatted 1500 300 No
GQJ1830-1 slatted 1800 300 No
GQJ1035-1 slatted 1000 350 No
GQJ1235-1 slatted 1200 350 No
GQJ1535-1 slatted 1500 350 No
GQJ1835-1 slatted 1800 350 No

 


Dimensions
● Standard width (mm): 1000 1000,12001200, 15001500, 1800
● Standard depth (mm): 300 300,350
Mounting post (supporting column)
● Made of AISI 304 (201 option is available), thickness
2.0 mm.
● Height: overall 800 mm, 9 slots for different heights,
each 60 mm apart.
Feel free to contact us should you have dimensional
requirement other than the above.

From the blog

Our latest posts

  • Isolate Power & Gas Before Servicing Commercial Gas Equipment

    Isolating power and gas is the first, most important step before cleaning burners, opening a gas train, or touching any ignition components. Done right, it prevents unexpected ignition, fuel release, shock, and equipment damage. This post gives technicians a precise, repeatable procedure you can embed in your SOPs. What “Isolate Power/Gas” Means Why both? Many

    Read more

  • Gas Pressure 101: Static vs. Dynamic — Which Reading Actually Matters?

    Set by dynamic, confirm with static: use dynamic pressure under load for manifold and inlet specs, and use static only to ensure you’re below the max. A quick field procedure and cues help you commission gas equipment right the first time.

    Read more

  • Reducing exhaust to improve yellow or lazy flame

    Why reducing exhaust can help (in some cases) Think of the kitchen as an air-balance equation: Exhaust (out) – Make-Up Air (in) = Pressure deficit (ΔP). In short: you’re not “adding oxygen” by reducing exhaust — you’re removing excessive suction so the oxygen already being supplied can actually reach the burners without being whisked away

    Read more