Solid-top-MAGH80ST

Features

● Heavy gauge design: 2.0 mm 304 table top; other structural area from 1.2mm to 2.0 mm
● Central burner made of cast iron
● The center of the 20 mm well polished plate can reach maximum 500 °C with temperature on the surface decreasing outward, creating differential temperature zone and meeting different heating or warming needs.
● Simultaneously accommodate various sizes of pans on the large cooking surface. One can move pans freely from one temperature zone to another as there is no physical boundary between zones.
● Hi / Lo Flame, with flame supervisory safety device
● Pulse igniter with protected pilot
● 6” adjustable leg

Gas inlet pressure:
● Natural Gas : 2.0 kPa
● LP Gas : 2.8 kPa
● Town Gas : 1.5 kPa
Gas inlet : DN20

Description

Model Description Dimensions (mm) Gas power
MAGH80ST Gas solid top 800 x 800 x 850 Top: 31000 btu/h (9 kW)
MAGH80STO Gas solid top + oven 800 x 800 x 850 Top: 31000 btu/h (9 kW)
Oven: 24,500 btu/h (7.1 kW)


From the blog

Our latest posts

  • Isolate Power & Gas Before Servicing Commercial Gas Equipment

    Isolating power and gas is the first, most important step before cleaning burners, opening a gas train, or touching any ignition components. Done right, it prevents unexpected ignition, fuel release, shock, and equipment damage. This post gives technicians a precise, repeatable procedure you can embed in your SOPs. What “Isolate Power/Gas” Means Why both? Many

    Read more

  • Gas Pressure 101: Static vs. Dynamic — Which Reading Actually Matters?

    Set by dynamic, confirm with static: use dynamic pressure under load for manifold and inlet specs, and use static only to ensure you’re below the max. A quick field procedure and cues help you commission gas equipment right the first time.

    Read more

  • Reducing exhaust to improve yellow or lazy flame

    Why reducing exhaust can help (in some cases) Think of the kitchen as an air-balance equation: Exhaust (out) – Make-Up Air (in) = Pressure deficit (ΔP). In short: you’re not “adding oxygen” by reducing exhaust — you’re removing excessive suction so the oxygen already being supplied can actually reach the burners without being whisked away

    Read more