Noodle-boiler-NGC6
High power
● 13 kW (44,500 btu/h) each tank x 2 , preheat water from 20 deg C to boiling state in less than 15 minutes.
● Recover temperature in peak hours in no time.
● Depending on the noodle type and hardness requirement, it takes as little as one minute to boil noodle, making total capacity 270 servings per hour
Features：
● Manual water inlet in the back
● Electronic ignition
● Flame failure supervisory device for safety
● Fresh water replenished by faucet in the back while old water flows into overflow.
● Dry boil protection
● Thermal efficiency 79%. Save you energy cost!
● Capacity: 30L each tank x 2
Control panel features
● Work with auto-lift system
● 2 programming channels per basket, 12 programming channels altogether.
● Adjustable stand-by water temperature to reduce energy loss.
● Display water temperature while cooking.
Accessories：
● Six noodle basket
Description
Noodle Boiler, or Ramen boiler as it is called in Japan, is widely used in conventional Asian noodle shop. People from different countries have a diversified preference on noodle hardness, which is largely dependent on the cooking time accuracy. As such, the digital control semi-automatic noodle boiler plays a pivotal part in guaranteeing your noodle quality.
| Model | Dimensions (mm) | Power | Gas inlet / Water inlet |
Drain outlet |
|---|---|---|---|---|
| NGC6 | 650 x 800 x 800 +50 | Gas : 44,500 btu (13 kW) x 2
Electric : 220V,50Hz,10W |
DN15 | DN40 |
Highly productive
Brandon noodle boiler preheats to boiling point in less than 15 minutes. The following data was taken at ambient temperature of 19 C. Actual warmer kitchen temperature will shorten preheat and recovery time even further
