Floor-standing-fryer-FRYA18CF2-11

Features:
● Flat bar heater: low density, long life.
● Heating element can be swung up for fry pot cleaning.
● Special heater enclosure to prevent oil ingress.
● Space saving built-in oil filter. Oil receptacle can be easily accessed for filter envelop changing.
● Deep cylinder cold area (If customers want a low fuel consumption pot, please choose our FRYS flat pot series)
● High temperature safety limit.
● Stainless steel drain valve with safety interlock.
● Casters for mobility
● Computer control board
● More than 20 programmable cooking channels
● Boil Out Mode for cleaning
● Deep Cleaning mode for oil filtering
● Load compensation
● AIF (Rush hour filter reminder by pass)
● Automelt cycle for solid shortening (oil)

Description

Accessories:
● Fryer baskets
● Crumb screen
● Drain clog clearance prod
● Drain oil extension pipe

● Capacity:
32 liter for per full vat, 15.5 liter for per split vat (Cold zone series),
23 liter for per full vat, 11 liter for per split vat (flat pot series).

From the blog

Our latest posts

  • Isolate Power & Gas Before Servicing Commercial Gas Equipment

    Isolating power and gas is the first, most important step before cleaning burners, opening a gas train, or touching any ignition components. Done right, it prevents unexpected ignition, fuel release, shock, and equipment damage. This post gives technicians a precise, repeatable procedure you can embed in your SOPs. What “Isolate Power/Gas” Means Why both? Many

    Read more

  • Gas Pressure 101: Static vs. Dynamic — Which Reading Actually Matters?

    Set by dynamic, confirm with static: use dynamic pressure under load for manifold and inlet specs, and use static only to ensure you’re below the max. A quick field procedure and cues help you commission gas equipment right the first time.

    Read more

  • Reducing exhaust to improve yellow or lazy flame

    Why reducing exhaust can help (in some cases) Think of the kitchen as an air-balance equation: Exhaust (out) – Make-Up Air (in) = Pressure deficit (ΔP). In short: you’re not “adding oxygen” by reducing exhaust — you’re removing excessive suction so the oxygen already being supplied can actually reach the burners without being whisked away

    Read more