Wok-BGW2-GS

Features

● Environmental protection concept features
The small fire is equipped with anti-strong airflow and
anti- strong wind technology, which can ensure that is
will not be extinguished in a closed combustion chamber
or frequently toss the pot
● High efficiency, low noise and low exhaust gas
The high-quality, revolving fire per-mixed burner can save
more than 40% of energy than the traditional, with a noise
of less than 70 decibels, and carbon monoxide (exhaust gas)
less than 0.05%
● Simple operation and safety protection
Independent fan, independent air inlet, simple operation,
all –round protection to prevent gas leakage
● 13.5” cast iron ring

● Water Inlet:DN15
● Gas inlet: DN25
● Drain outlet: DN40

Category:

Description

Gas fired Guangdong style environmentally wok range

Model No. of Rear Pot Dimensions (mm) Gas power Fried wok size
BGW1-GS 1 1200 x 1200 x (810+440) 95600 btu/h (28 kW) 18” – 22”
BGW2-GS 2 2150 x 1200 x (810+440) 95600 btu/h (28 kW) x 2 18” – 22”
BGW1-GK 1 1200 x 1050 x (810+440) 95600 btu/h (28 kW) 18” – 22”
BGW2-GK 2 2150 x 1050 x (810+440) 95600 btu/h (28 kW) x 2 18” – 22”
BGW21-GK 1 1800 x 1050 x (810+440) 95600 btu/h (28 kW) x 2 18” – 22”

Gas fired Guangdong style environmentally wok range

Model No. of Rear Pot Dimensions (mm) Gas power Fried wok size
BGW1-GS 1/1 1200 x 1200 x (810+440) 95600 + 17100 btu/h (28 + 5 kW) 18” – 22”
BGW2-GS 2/2 2150 x 1200 x (810+440) 95600 + 17100 btu/h (28 + 5 kW) x 2 18” – 22”

Chaozhou style environmentally friendly wok range

Model No. of Rear Pot Dimensions (mm) Gas power Fried wok size
BGW2-CS 2 / 1 2500 x 1250 x (810+440) 95600Btu/h (28 kW) x 2
+ 47800 btu/h (14 kW)
18” – 22”

Gas fired Chaozhou style environmentally wok range

Model No. of Rear Pot Dimensions (mm) Gas power Fried wok size
BGW1-HF 0 900 x 900 x (810+440) 95600 btu/h (28 kW) 14” – 16”

From the blog

Our latest posts

  • Isolate Power & Gas Before Servicing Commercial Gas Equipment

    Isolating power and gas is the first, most important step before cleaning burners, opening a gas train, or touching any ignition components. Done right, it prevents unexpected ignition, fuel release, shock, and equipment damage. This post gives technicians a precise, repeatable procedure you can embed in your SOPs. What “Isolate Power/Gas” Means Why both? Many

    Read more

  • Gas Pressure 101: Static vs. Dynamic — Which Reading Actually Matters?

    Set by dynamic, confirm with static: use dynamic pressure under load for manifold and inlet specs, and use static only to ensure you’re below the max. A quick field procedure and cues help you commission gas equipment right the first time.

    Read more

  • Reducing exhaust to improve yellow or lazy flame

    Why reducing exhaust can help (in some cases) Think of the kitchen as an air-balance equation: Exhaust (out) – Make-Up Air (in) = Pressure deficit (ΔP). In short: you’re not “adding oxygen” by reducing exhaust — you’re removing excessive suction so the oxygen already being supplied can actually reach the burners without being whisked away

    Read more